Vortech 1996-1998 Ford 4.6L Mustang Cobra User Manual

Page 22

P/N: 4FK020-010

24NOV08 v3.0(4.6L DOHC Cobra (4FK v3.0))

H. Following Figs. 7-d & 7-e, attach the supercharg-

er/aluminum bracket assembly with the Vortech

idler pulley and idler spacer to the alternator stud

and front cover using the supplied 8mm hardware.

Route the new, longer belt around the outside of

the supercharger drive pulley, then around the

inside of the Vortech idler. Finish routing the belt

around all of the pulleys, except for the water

pump. Make sure that the Vortech idler pulley

and spacer (located against the alternator base),

are seated and located in their proper position

before tightening down the bolts (see Fig. 7-g

for belt routing).

1996 - 1997 moDels oNly

NOTE: Make sure that a non-flanged water pump

pulley is installed on the vehicle. See note

at the beginning of this manual.

Fig. 7-e

7. MAIN BRACKET ASSEMBLY/DRIVE BELT, cont’d.

Fig. 7-d