Vortech 1993-1996 5.2L Grand Cherokee - Manual (Page 10)

C. Please note that the 3-3/4" bolt also holds
the supercharger mounting plate. This
fastener must be threaded into its hole
loosely as a pilot while securing the cast
bracket with the other two, then removed
for installation of the supercharger
mounting plate. Reinstall the bolt after
mounting the plate and before attaching
the spring tensioner.
D. Attach the stock belt tensioner to the front
of the supercharger mounting plate as
shown. Make sure the indexing tab is
engaged in the slot.
E. Secure the plate and tensioner as an
assembly to the cast bracket.
F. Attach the support strut between the
supercharger mounting plate and the
second exhaust manifold stud. Secure with
the supplied stainless steel bolt.
G. Attach the 3 loose ground connections
from the main harness (near the
supercharger mounting bracket) to the
existing alternator mounting bolt and
secure.
ATTACH TO
EXHAUST MANIFOLD
3/8-16 X 1.0
3/8-16 X 3.0
3/8-16 X 1.0
3/8-16 X 3.0
3/8-16 X 3.75
GEARCHARGER
MOUNTING PLATE
MAIN MOUNTING
BRACKET
SUPPORT
STOCK TENSIONER
5/16-18 X 3.5
3/8-16 x 1"
3/8-16 x 3"
3/8-16 x 3-3/4"
3/8-16 x 3"
3/8-16 x 1"
5/16-18 x 4-1/2"
SUPERCHARGER
MOUNTING PLATE
MAIN
HARNESS
GROUND TO ALTERNATOR
MOUNTING BOLT
3/8-16 x 3-3/4" -
(BOLT MUST BE
INSTALLED BEFORE
SPRING TENSIONER
IS MOUNTED.)
4
5. MAIN MOUNTING BRACKET AND PLATE, cont'd.
EXHAUST
MANIFOLD
.60 SPACER
5/16" BOLT
HEAT
SHIELD
.25 SPACER
VORTECH
SUPPORT