VDO WR MC 2.0 - Manual (Page 61)

IT NL PL FR ES ENG DE
www.vdocyclecomputing.com MC 2.0 WR 61
ALTI DOWN--ALTI DOWN 1 or 2 is shown on the
display.
Press ALTI
A or P to make a selection.
Press M in confirmation.
ALTI DOWN 1--SET METER or FEET appears on the display.
The first digit of the altitude reading flashes.
Press ALTI
A to reduce the value or P to increase it.
Once you have set the correct value, press M to confirm your setting.
The second digit flashes.
Press ALTI
A to reduce the value or P to increase it.
Once you have set the correct value, press M to confirm your setting.
Continue the setting process until all digits have been set.
ALTI DOWN 1--SET OK?
Press
M in confirmation.
The MC 2.0 confirms by displaying ALTI DOWN 1--SET DONE.
To exit settings mode, press and hold the C button for three seconds.
SETTINGS--CLOSE? flashes. The MC 2.0 switches back to function mode.
7. Sleep mode
The MC 2.0 has a sleep mode to save the battery.
The MC 2.0 goes into sleep mode after five minutes
if no speed signals are received.
SLEEP MODE appears on the display.
Pressing any button or continue the ride will wake up the MC 2.0 WR.