VDO WR MC 2.0 - Manual (Page 58)

MC 2.0 WR VDO CYCLECOMPUTING 58
DE ENG FR ES IT NL PL
ACTUAL ALTI--ALTITUDE or AIR PRESSURE appears
on the display.
Press ALTI
A or P to make a selection.
Press M in confirmation.
If ALTITUDe is selected:
ACTUAL ALTI--SET METER or FEET appears on the
display. The meter or feet number flashes.
Press ALTI
A to reduce the value or P to increase
it. Once you have set the correct value, press M to
confirm your setting.
ACTUAL ALTI––SET OK?
Press
M in confirmation.
The MC 2.0 confirms by displaying ACTUAL ALTI--SET DONE.
This area enables you to set the current altitude.
The current altitude is set if the air pressure has changed due to the
weather and the altitude shown on the display no longer corresponds
to the actual current altitude (e.g. the altitude details shown at the
summit).
There are two ways of setting the current altitude. Enter the current
altitude in meters/feet or the sea level pressure. On entering the sea
level pressure, the current altitude is calculated.
Details of the sea level pressure can be found on weather-pages in
Internet.
Process:
Press and hold
M for three seconds. SETTINGS--OPEN? flashes.
LANGUAGE---SELECT--- appears on the display.
Press ALTI A to scroll to ACTUAL ALTI--- SET ---.
Press M in confirmation.
6.9 Setting the current altitude/actual altitude