VDO WR MC 2.0 - Manual (Page 44)

MC 2.0 WR VDO CYCLECOMPUTING 44
DE ENG FR ES IT NL PL
If the display backlight is activated and a button is pressed,
the backlight illuminates for a few seconds.
ATTeNTION: press the buttons BIKe + CLeAR again to switch off the
display backlight during the day. This SAVeS BATTeRY POWeR.
ACTUAL ALTITUDE can be used to re-calibrate the current altitude.
This can be done by entering the (known) altitude in METERS/FEET
or the AIR PRESSURE. The sea level pressure can be found online on
weather forecast websites.
Press M to confirm the ALTITUDE--ACTUAL ALTI
setting.
ACTUAL ALTI--ALTITUDE or
ACTUAL ALTI--AIR PRESSURE
is displayed.
3.5 Display backlight
3.6 Selecting the start altitude / recalibrating the actual altitude
The MC 2.0 has a display backlight.
The display backlight is activated by pressing the buttons
+ C .
If the display backlight is activated, the LIGHT icon appears on the
display.
The MC 2.0 can work with two different start altitudes
(example: home altitude and altitude at holiday location).
The current altitude can be set by entering the number of
METERS/FEET or the AIR PRESSURE. Please also read section 6.10.
B Press and hold the ALTI button A for three seconds.
B ALTITUDE SELECT? flashes on the display.
B ALTITUDE
B ACTUAL ALTI
B HOME 1
B HOME 2
is displayed (depending on the previously accessed configuration).
B A selection is made by pressing ALTI A or P .
B The selection is confirmed by pressing M .
B For the start altitudes, the query 300 appears (numerical example).
B HOME ALTI 1 (or 2) SELECT OK ?
B The selection is confirmed by pressing MENU.
B The MC 2.0 confirms by displaying ALTITUDE DONE.
3.8 Start/stop of the stopwatch