VDO WR MC 2.0 - Manual (Page 54)

MC 2.0 WR VDO CYCLECOMPUTING 54
DE ENG FR ES IT NL PL
This area enables you to set the total distance cycled. The information
is separately provided for bike 1 and bike 2. At the start of the season,
you can reset the total distance cycled to zero, for example.
ATTENTION: the total distance is SAVED when the battery is
changed. The data is not lost.
Process:
Press and hold
M for three seconds. SETTINGS--OPEN? flashes.
LANGUAGE---SELECT---appears on the display.
Press P to scroll to ODOMETER---SET---.
Press M in confirmation.
ODOMETER ODO BIKE 1 or ODO BIKE 2 is shown on
the display.
Press ALTI
A or P to make a selection.
Press M in confirmation.
ODO BIKE 1 (or 2)--SET KM or SET MILE is shown on
the display.
The first digit flashes.
Press ALTI
A to reduce the value or P to increase
it. Once you have set the correct value, press M to
confirm your setting.
The second digit now flashes.
Press ALTI
A to reduce the value or P to increase
it. Once you have set the correct value, press M to
confirm your setting.
Continue the setting process until all digits have
been set.
ODO BIKE 1 (or BIKE 2)--SET OK? Press M to confirm
or C to make a correction.
The MC 2.0 confirms by displaying ODO BIKE 1
(or BIKE 2) SET DONE.
To exit settings mode, press and hold the C button for three seconds.
SETTINGS--CLOSE? flashes. The MC 2.0 switches back to function mode.
6.5 Setting the total distance