VDO WR MC 2.0 - Manual (Page 59)

IT NL PL FR ES ENG DE
www.vdocyclecomputing.com MC 2.0 WR 59
If AIR PReSSURe is selected:
AIR PRESSURE--SET PRESSURE appears on the
display. The air pressure number flashes.
Press ALTI
A to reduce the value or P to increase
it. Once you have set the correct value, press M to
confirm your setting.
Dimension of Air Pressure is hPa.
AIR PRESSURE--SET OK?
Press
M in confirmation.
The MC 2.0 confirms by displaying ACTUAL ALTI--SET DONE.
To exit settings mode, press and hold the C button for three seconds.
SETTINGS CLOSE? flashes. The MC 2.0 switches back to function mode.
6.10 Adjusting the altitude when transporting the bike
6.11 Setting the altitude gain uphill
The MC 2.0 has a movement sensor. If the bike is transported with
MC 2.0 on mount (e.g. by car), the movement sensor will adjust the
current altitude if the air pressure changes during transportation. To do this, the MC 2.0 WL must be positioned in the handlebar bracket.
The altitude gain uphill can be separately set for BIKE 1 and BIKE 2.
Before the start of the season, you can reset the total altitude gain
to zero.
ATTENTION: the total altitude gain is SAVED when the battery is
changed. The data is not lost.
Process:
Press and hold
M for three seconds. SETTINGS--OPEN? flashes.
LANGUAGE---SELECT---appears on the display.
Press P to scroll to ALTI UP---SET---.
Press M in confirmation.