VDO WR X2 - Manual (Page 154)

X2 VDO CYCLECOMPUTING 4
GB SLO PL JP JP PL SLO GB
www.vdocyclecomputing.com X2 5
1. Display
The display can be divided
into 4 sections:
Section 1
always shows
the current time.
Service indicator
shows that your bike should go for a service.
You can set the service interval individually for
bike 1 and bike 2.
Stopwatch indicator
shows that the stopwatch is still running whilst
you have retrieved other information on the
display.
Indicator bike 1/bike 2
The computer can work with two different set-
tings for 2 bikes. The indicator shows which of the
two bikes you have chosen to use.
The total distances are accordingly counted and
stored separately for bike 1 and bike 2.
Measurement unit (KMH or MPH)
The computer can display both KHM and MPH.
Distances are shown in kilometres or miles
accordingly.The indicator shows the selected
measurement unit.
Speed difference indicator (current)
to speed (average)
The computer compares the current speed
with the average speed.
The indicator shows:
B whether the current speed is higher than
the average (+1 KMH)
B below the average (-1 KMH)
B or matches the average
(tolerance +/- 1 KMH).
Menu prompt indicator
When a submenu has been accessed, these indi-
cators flash and show that there are other selec-
tion options or that the computer is waiting for
an entry (setting mode).
You will also find
indicator elements
on the display.
You can find the description
of the individual indicators
on the right hand side.
Section 2
shows the
current speed.
Section 3
shows the value of the
display function/
information that you
selected.
Section 4
shows the description of
the selected function in
the top line (info line). The
second line (menu line)
shows,
B whether there is more
information „MORE“
B whether there is
another selection
option „SELECT“