VDO WR X2 - Manual (Page 14)

X2 VDO CYCLECOMPUTING 26
F I I F
www.vdocyclecomputing.com X2 27
D GB D GB
C = CLEAR
In function mode:
B Jump back a menu level from
the submenu.
B Hold C for 3 seconds:
Set timer back to zero.
In setting mode:
B Jump back to function mode.
B Correct an entry.
B Jump back a digit.
= DOWN
In function mode:
B Scroll downwards within
the functions.
In setting mode:
B Scroll downwards within
the setting modes.
B Decrease a digit.
M = MENU
In function mode:
B Access available submenu.
B Confirm selection.
B Start/stop stopwatch.
You can recognise a submenu by
the flashing menu indicators.
In setting mode:
B Select a setting.
B Confirm a setting.
B Confirm a selection made.
= UP
In function mode:
B Scroll upwards within
the functions
In setting mode:
B Scroll upwards within
the setting modes.
B Increase a digit.
Menu indicators on the display flash to show that
there are other selection options.
In function mode and setting mode, the computer is
operated using the 4 buttons.
2. Operation
To make your computer easy to use, we have devel-
oped the EMC Easy Menu Control system.
The EMC makes your computer easier to operate
by means of a full text menu guidance,
as is used on most mobile phones.
3. Information functions in function mode
TRIPDISTANCE
Shows the distance of the current trip since the
last reset. Maximum value 999.99 km.
If the maximum value is exceeded, the counter
starts again at zero. At the same time the values for
ride time and average speed are set back to zero
TRIPDISTANCE/MORE
MORE shows that there is a submenu for the main
menu TRIPDISTANCE. You open the submenu with
the
M button. In the submenu you will find:
B Total kilometres BIKE 1 ODO BIKE 1 up to a
maximum of 99,999 km.
B Total kilometres BIKE 2 ODO BIKE 2 up to a
maximum of 99,999 km.
B Total kilometres for Bike 1 + Bike 2 ODO TOTAL
up to a maximum of 199,999 km.
You leave the submenu by pressing
C again.
RIDE TIME
Shows the ride time of the current day‘s trip since
the last reset. Maximum 23:59:59 HH:MM:SS
If the maximum value is exceeded, the ride time
measurement starts again at zero. At the same
time the day‘s tripdistance and average speed are
set back to zero.
RIDE TIME/MORE
MORE shows that there is a submenu for the main
menu RIDE TIME. You open the submenu with
M .
In the submenu you will find.
B Total ride time bike 1 up to a maximum of
999:59 HHH:MM.
B Total ride time bike 2 up to a maximum of
999:59 HHH:MM.
B Total ride time bike 1+ bike 2 up to a maximum
of 1999:59 HHHH:MM.
You leave the submenu by pressing
C again.
AVG SPEED
Shows the average speed, calculated from the
day‘s tripdistance and ride time, since the last reset
Accuracy: 2 decimal places.
The average speed is recalculated if the day‘s trip-
distance or ride time exceeds the maximum value.
MAX SPEED
Shows the maximum speed on the current trip since
the last reset. Accuracy: 2 decimal places.
NAVIGATOR
The navigator is a second day‘s kilometre counter
The counter is:
B Independent of the day‘s tripdistance counter.
B Can be reset to zero as often as you want.
B Can be set to a starting value.
B Can count forwards or backwards from this
starting value.
These special options make it easier to follow
trips from a touring book or Roadbook.
C = CLEAR
FUNCTION 3
FUNCTION 4
FUNCTION 5
FUNCTION 6
DOWN
M = MENU
UP