56 m6 settings – total values – distance uphill – VDO M6WL User Manual

Page 56

Settings – total values – distance uphill

In the M6, you can set the distance travelled uphill separately
for bike 1 and bike 2, for example at the start of the new
cycling season.

ATTENTION:

the M6 stores all total values even if you

replace the batteries. No data is lost.

How to set the distance travelled uphill:

Press and hold the SET button until the settings menu
opens.
Press the

BIKE button to move from Memory to Settings.

Press the

SET button to open the settings.

“Language” appears on the display.

Press the

BIKE or TPC button to scroll to the settings

for the

total values.

Press the

SET button to open the settings.

Press the

BIKE or TPC button to scroll to the setting

Dist Up (distance travelled uphill).

Press the

SET button to open the settings.

Press the

BIKE or TPC button to select whether you want

to configure the setting for

bike 1 or bike 2.

Press the

SET button to confirm your selection and open

the setting.

The

left digit flashes. Press the BIKE or TPC button

to set the value for this digit.

Press the

SET button to confirm your setting.