46 m6 settings – total values – total distance – VDO M6WL User Manual
Page 46
46
M6
Settings – total values – total distance
You can set the total distance ridden on the VDO M6.
For example, you can enter your data here at the start of a
new cycling season. You can set the total distance separately
for bike 1 and bike 2.
ATTENTION:
the M6 has a data memory.
No data is lost when the battery is replaced.
How to set the total distance:
Press and hold the SET button until the settings menu
opens.
Press the
BIKE button to move from Memory to Settings.
Press the
SET button to open the settings.
“Language” appears on the display.
Press the
BIKE or TPC button to scroll to the settings
for the
total values.
Press the
SET button to open the settings.
Press the
BIKE or TPC button to scroll to the settings
for the
Total Distance.
Press the
SET button to open the settings.
Press the
BIKE or TPC button to select whether
you want to set the
total distance for bike 1 or bike 2.
Press the
SET button to confirm the selection.
The left digit flashes.
Press the
BIKE or TPC button to change this digit.
Once this digit has been set, confirm the setting by pressing
the
SET button.