VDO M6WL - Manual (Page 47)

47
M6
Settings – total values – total distance
The next digit starts to flash and is ready to be set.
Press the BIKE or TPC button to change this digit.
Once this digit has also been set, confirm the setting
by pressing the
SET button.
The next digit flashes.
Once you have set all the digits, confirm the setting again
by pressing the
SET button.
The response “Set OK” appears on the display.
The set value is stored.
If you want to configure further settings,
press the
BIKE or TPC button to access these.
If you do not want to configure any further settings,
press and hold the
SET button.
The settings menu closes.
The VDO M6 returns to function mode.