Mains power, Ground connection, Mains fuse – Two Notes VM-202 User Manual
Page 8: Safety use conditions, Cleaning, 3 mains power, 4 ground connection, 5 mains fuse, 6 safety use conditions, 7 cleaning
Foreword
1.3
Mains power
Please verify that the voltage required by the machine matches the voltage of your country. If not or if
unsure, don’t connect the machine to the wall outlet, this could result in damage to the machine and
poential injuries to the user.
This product must not be used when there is lightning. In case of several weather with a risk of lightning,
unplug the mains power supply to reduce the risk of electric shock and fire.
The mains power cable provided with the machine complies with the standards of the country where
you purchased the product. If replacement is needed, please use a standard compliant cable.
1.4
Ground connection
For safety reasons, the machine needs to be plugged to a wall outlet providing a ground connection. If
your electric installation does not provide a ground connection or if you are unsure, please ask a qualified
electrician for help.
If your mains power cable doesn’t match your wall outlet, ask a qualified electrician for help.
Never remove the outer or inner ground connection of the unit to prevent risks of electric shock or fire.
1.5
Mains fuse
The unit comes with a thermal fuse in the mains power input. If replacement is needed, first unplug the
mains power cable. Always use a fuse of the same type as the original one.
To prevent risk of electric shock and fire, never try to bypass the fuse by any means
1.6
Safety use conditions
The Torpedo must never be used :
• near a heat source,
• near a flame,
• in the rain,
• in damp areas,
• near any kinds of liquids.
The unit is designed to be rackmounted into a 19" rack unit with 4 screws (not provided).
When transporting the unit, care needs to be taken to avoid any shocks that could cause damage
that would require the assistance of a qualified technician.
Never cover or restrict the ventilation openings. Never unplug or deactivate the heat control monitoring
system, or you will be exposed to risk of electric shock and fire.
1.7
Cleaning
Always use a dry and soft cloth with no alcohol or solvents for cleaning. Please keep the unit clean and
free from dust.
8
Two Notes Audio Engineering
Torpedo VM-202