Two Notes VM-202 - Manual (Page 27)

Configuring and using the Torpedo VM-202
5 PROGRAM
In this menu you can save and move the VM-202 presets.
5.1 Save
• Save : Press "OK" to display the current preset saving screen.
Choose the destination amongst the 100 at your disposal, using
the "NAVI" knob. Press "OK" again to save the preset.
5.2 Name
• Name : Here you can give a name (10 characters maximum) to
your preset. Move through the alphabet using the "NAVI" knob
and select the letters with "OK".
6 COMPARE
The "COMPARE" switch controls an evolved comparison function developed by Two Notes Audio Engineer-
ing. Think about it as a temporary set of parameters, re-initialized after each startup of the unit. It can be
used to quickly and easily compare two sets of parameters. It can be compared to the "Clipboard" filled
by the "Copy" function of our personal computers.
1. At startup, the normal set of parameters and the temporary one are the same.
2. You can switch between the temporary set ("COMPARE" LED lit) and the normal one ("COMPARE" LED
off) by briefly pressing the "COMPARE" switch.
3. Any modification done on either the normal or the temporary set is saved respectively in the normal
or temporary set, without affecting the other. You have two separate sets of parameters at hand.
4. You can copy the normal set to the temporary one by pressing the "COMPARE" switch for about 2
seconds. The "COMPARE" LED flashes, indicating the copy has been done. You can not copy the
temporary set to the normal one.
5. Any changes made in a parameters set (normal or temporary) are automatically saved in this set
without affecting the other. You have at your disposal, two different and separated parameters sets.
Let’s consider an example :
1. Make sure the "COMPARE" LED is off. Select a preset, do some modifications as desired : you now
have a certain set of parameters in the unit.
2. Save this current ("normal") set of parameters to the temporary one (see above). Now the two sets
are identical.
3. Do some more modifications, for example change the speaker model. Now the two sets are different
: you can hear the difference by switching between the two (see above).
Two Notes Audio Engineering Torpedo VM-202 27