beautypg.com

Turning Technologies ResponseCard Programmer User Manual

Page 9

background image

ResponseCard Programmer

9

6

Press the designated Program Key on the ResponseCard. For example, if the Program Key is 9/I, press 9/I on the
ResponseCard.

A notification will briefly flash on both the ResponseCard Programmer and the XR or NXT ResponseCard indicating that
the card has been successfully programmed. A green light will flash on the ResponseCard RF indicating that the card
has been successfully programmed.

7

Repeat step 6 until all ResponseCards are programmed.

turningtechnologies.com/user-guides