Turning Technologies ResponseCard Programmer - Manual (Page 4)

ResponseCard Programmer 4
ABOUT RESPONSECARD PROGRAMMER
The ResponseCard Programmer allows users to quickly and easily program ResponseCards to a new Unit ID. The
ResponseCard Programmer supports three types of ResponseCards:
l
ResponseCard RF - RRRF-02 and RRRF-03
l
ResponseCard XR-01 - 1.2 firmware or higher
l
ResponseCard NXT - 0.7.5 firmware or higher
IMPORTANT
The ResponseCard Programmer is NOT compatible with Response Card XR-02.
Before You Begin
Changing ResponseCard RF, XR-01 and NXT Channels
Changing the ResponseCard Programmer Channel
Setting the Program Key
Setting the Screen Contrast
Changing ResponseCard RF, XR-01 and NXT Channels
The ResponseCard Programmer and ResponseCards must be on the same channel in order to communicate.
How to change ResponseCard RF channels...
1 Press the CH button. A red and green light will flash.
2 Enter the two-digit channel number. An amber light will flash.
3 Press and release the CH button. A green light will flash.
How to change ResponseCard XR-01 channels...
1 Press the Menu button.
2 Press the down arrow/Yes button until Change Channel is highlighted. Press Enter.
3 Enter the two-digit channel number and press Enter.
How to change ResponseCard NXT channels...
1 Press Channel.
2 Enter the two-digit channel number in the channel box.
3 Press the Enter button.
turningtechnologies.com/user-guides