Dynasty Spas Deluxe System D-1000 - Manual (Page 31)

Air Blower The air blower supplies air to the jets creating a hydro
massage action
Air Loop A back up system for the check valve, prevents water
from entering air blower
Air Venturi Mounted on the lip of the spa or at the equipment
shroud, to induce air to the jets
Cabinet The redwood or Dynalast foam that surrounds the spa,
also called a skirt.
Check Valve Prevents water back flow to blower.
Control Panel Mounted on the lip of the spa. The digital panel that
controls the spas functions.
Control Box Basically the brain of the spa. Power is distributed to all
functions of the spa, pumps, blower, ozonator, flow switch
heat, etc.
Drain The fitting set into the footwell that drains water from the
spa.
Filter The filter cleans the spa and removes particles and debris
and protects the equipment from foreign substances.
Footwell The bottom of a spa where you place your feet. Dynasty
is known for it's larger footwells and comfortable
seating.
G.F.C.I. Breaker The electronic switch installed in the power box of your
house to give power to the spa. This is a non-user
serviceable part.
Gate Valves T-handled valves located at the inlets and outlets of
the equipment. The gate valve blocks or opens the
water line by the equipment.
Heater The thermostatically controlled heater raises the
temperature of the water to the desired degree.
This is located under the control box in the equipment
area.
Hose Bib Used in the draining of the spa, looks like an outdoor
faucet and fits a standard garden hose.
Jets The fittings on your spa that direct the flow of water
for massaging action.
Ozone A water purification supplement method using Ozone
gas. Gas is made by an Ozone Generator unit that can
reduce you sanitizer needs by up to 25%.
G l o s s a r y o f T e r m s
31