beautypg.com

Introduction, Packaging information – StorCase Technology 12-Bay 4U SCSI Ultra320 User Manual

Page 10

background image

Introduction

1

InfoStation 12-Bay SCSI User's Guide - Rev. B00

StorCase Technology, Inc.

INTRODUCTION

CAUTION:

The InfoStation contains NO USER SERVICEABLE parts inside the unit. Refer ALL

servicing to qualified service personnel!

This unit has more than one power supply cord. Disconnect two power supply

cords before servicing to avoid electric shock.

Danger of explosion if the RAID battery is incorrectly replaced! Replace only

with the same or equivalent type recommended by the manufacturer. Dispose

of used batteries according to the manufacturer's instructions.

VHDCI connectors are easily damaged by improper handling. Visually inspect

each connector for bent contacts and carefully align prior to insertion.

NOTES:

The installation, configuration, and use of the StorCase InfoStation chassis

requires a certain level of expertise and experience on the part of the user/

integrator. Since there are many configuration options and variables (ie. host

platforms, applications, etc), only general/typical configuration guidelines will

be discussed in this User's Guide.

For installation information, refer to the InfoStation Installation Guide.

Packaging Information

The StorCase Technology InfoStation external expansion chassis is shipped in a container

designed to provide protection and prevent damage during shipment, as confirmed by the

International Safe Transit Association (ISTA Procedure 1A). The InfoStation was carefully

inspected before and during the packing procedure at the factory. Evidence of any damage

to the InfoStation should be reported to the shipper immediately.

If the wrong InfoStation model has been received, please call your reseller or StorCase at

(800) 435-0642 to arrange for a Return Material Authorization (RMA). StorCase cannot ac-

cept returns which do not display an RMA number on the outside of the package. Return the

unit with all the original packing materials.

Before removing any component from its packaging, discharge any static electricity by

touching a properly grounded metal object.