beautypg.com

StorCase Technology DS350 User Manual

Page 19

background image

10

Installation

Kingston Technology Company

DS350 User's Guide - Rev. A00

5. Connect the I/O cable(s) to the drive(s). Verify that the Pin 1 indicator on the cable is

properly aligned (Refer to the drive manufacturer's documentation for more informa-

tion).

6. Connect the 4-pin DC power cable(s) from the DS350 power strip to the drive(s)

(Figure 10).

7. Reinstall the access panel and fasten all screws.

8. Connect the AC power cable to the DS350 and turn on power. Should there be any

unusual sound, turn the DS350 off immediately. Disconnect the power cable and

remove the access panel to locate the source of the problem.

Figure 10: DS350 Power Strip