Ds350 rear panel – StorCase Technology DS350 User Manual
Page 14

Introduction
5
DS350 User's Guide - Rev. A00
Kingston Technology Company
DS350 Rear Panel
(See Figure 4)
Diagnostic Connector - Provides DS350 system status for diagnostic testing.
Provides signals for:
power supply status
fan failure
over temperature condition
A Molex 3.00mm (0.118") pitch Micro-Fit plug (part number 4302) is provided on the
DS350 back panel. A Molex 3.00mm (0.118") pitch Micro-Fit receptacle (part number
42025) is required for mating connection. The above signals are active low and require
a 10K pull-up resistor.
SCSI I/O Connector(s) - The DS350 can be equipped with 50-pin MM (HD50) SCSI
2, 68-pin Wide SCSI 3, or 68-pin VHDCI I/O connectors. Up to two (2) SCSI channels
can be supported.
Power Supply LED(s) - Illuminate while power supply is on and functioning normally.
Cooling Fan(s) - Three (3) 80mm back panel fans provide ample chassis ventilation
(37.4 CFM each).
A/C Power In - Accepts U.S. and other available international standard power cables
(Refer to Appendix C for more information).
Figure 4: DS350 Rear Panel