StorCase Technology DS100 - Manual (Page 14)

Introduction 5
DS100 User's Guide - Rev. F02 StorCase Technology, Inc.
Rear Panel
(See Figure 4)
• SCSI ID Select Switch(es) - Provide SCSI ID selection. The DS100 uses two (2)
rotating switches (refer to "Selecting the SCSI ID Number" for additional infor-
mation).
• Fuse - A fuse located on the rear panel protects the DS100 circuitry (refer to Ap-
pendix C for fuse removal and installation information).
• Power Switch - Provides power to the DS100 chassis.
• A/C Connector - Accepts U.S. and other available international standard power
cables. Contact StorCase for ordering information.
• I/O Connectors - The DS100 is available with 50-pin MM (HD50), 68-pin HD, or 68-
pin VHDCI (for SCSI Ultra2 and Ultra160) connections. The DS100 4-bay is optionally
available with dual port connectors.
Figure 4: DS100 Rear Panel
(DS100 2-Bay Shown)