StorCase Technology DE300i-SW160 - Manual (Page 18)

DE300i-SW160 User's Guide - Rev. A00 StorCase Technology Inc.
Installation 11
PIN Signal Function
1 ID0 SCSI ID
2 GND Ground
3 ID1 SCSI ID
4 GND Ground
5 ID2 SCSI ID
6 GND Ground
7 ID3 SCSI ID
8 GND Ground
9 GND Drive Synchronization Signal
10 GND Spare Ground
11 RLEDC Remote LED Cathode
12 RLEDA Remote LED Anode
13 DFAULT Force Drive Fault Signal to Display
14 GND Ground
15 CIF1 Reserved
16 GND Ground
17 CIF2 Reserved
18 GND Ground
19 CIF3 Reserved
20 GND Ground
21 LKA Disable Isolator Functions
22 LKB Disable Isolator Functions
IMPORTANT NOTE: In order to use remote ID selection from a computer or
expansion chassis, the Unit ID number on the Data Express
receiving frame must be set to "0" with the provided alignment
tool. Refer to the section "Selecting the Unit Number" later in
this manual for the Unit ID selection procedure.
Table 2: J3A1, J3B1, J3C1 Option Pin Signal Descriptions