Appendix c - optional user configurations, Attaching the on/off key to non-solenoid units – StorCase Technology DE100i-S User Manual
Page 30
DE100i-S User's Guide - Rev. H00
StorCase Technology, Inc.
Appendix C - Optional User Configurations
23
Appendix C - Optional User Configurations
Attaching the ON/OFF Key to Non-Solenoid Units
The following information will provide the necessary steps to attach the ON/OFF key to the
key/lock mechanism so that it is non-removable. This configuration is preferred for some
applications and is reversible.
1. Verify that power to the receiving frame is OFF.
Locate the rectangular shaped key lock mecha-
nism access hole on the inside of the receiving
frame. Note that the pawl is in an upright position.
Insert the key into the key lock.
2. Rotate the key 90 degrees counterclockwise so
that the pawl is visible in the access hole (as
shown in the figure at left).
3. Using the provided alignment tool, unscrew and
remove the pawl from the access hole.
4. Rotate the key 180 degrees clockwise.
5. Reinstall the pawl into the access hole with the
alignment tool.
The drive lock key is now attached to the
key lock mechanism.
Figure C-1: Attaching the ON/OFF Key