StorCase Technology DE100i-S - Manual (Page 29)

StorCase Technology, Inc. DE100i-S User's Guide - Rev. H00
22 Appendix B - Factory-Installed Options
Figure B-4: Solenoid Mechanism
Solenoid Drive Lock
The factory installed solenoid option prevents premature removal of the carrier and drive unit
until the target drive has fully spun down. For disk drives, this period of time can range from
15-40 seconds, depending on the type of drive being used (e.g. Barracuda drives require up
to 50 seconds). Refer to the drive manufacturer's documentation for specific drive information.
The solenoid lock is controlled by a timing switch located on the side of the receiving frame.
Refer to Figure 11, for information describing the readjustment of the timer setting.
The solenoid option provides an extra step in drive protection by preventing the removal and
movement of the drive until the drive motor has fully stopped.