StorCase Technology DE100i-S - Manual (Page 28)

DE100i-S User's Guide - Rev. H00 StorCase Technology, Inc.
Appendix B - Factory-Installed Options 21
Carrier Installation
Follow the procedures below to install the DE100i-S drive carrier into the receiving frame
equipped with the Hot Swap option.
1. Install the carrier into the receiving frame. A "u" will be present on the front panel,
indicating that the carrier is in an unlocked condition.
2. Turn the key lock mechanism, located on the front of the receiving frame, counter
clockwise to the ON position. This locks the drive into the receiving frame and activates
the Hot Swap Board. The drive will begin to spin up and the unit number on the display
will begin flashing.
3. After a short length of time the unit display will stop flashing, indicating that the device
is ready to be used.