StorCase Technology DE100i-A - Manual (Page 11)

StorCase Technology, Inc. DE100i-A User's Guide - Rev. F01
4 Introduction
Receiving Frame
Front
Key Lock/Drive
Power Switch
2.
Unit ID Number
Indicator
Activity Indicator
0231A
Device Spin
Down/Up
Timer Switch
Carrier Guide
High Insertion
Count Mating
Connector
All Steel
Receiving
Frame
Figure 4: Receiving Frame Unit ID Number and Activity Display
Receiving Frame Front Panel
• The Key Lock/Drive Power Switch performs three functions. The key lock
assures proper seating of the drive carrier within the receiving frame, turns power
to the drive carrier on and off, and prevents unauthorized removal or installation
of the carrier. For the computer to access data on the DE100i-A disk drive, the key
must be turned counterclockwise to the locked position.
• The Unit ID Number Indicator displays the physical address of the DE100i-A drive
carrier when the carrier is Installed and Locked in the receiving frame or Removed
from the receiving frame. If the drive carrier is Installed but Not Locked, a "u" will
be displayed. The unit number is selected by means of the unit ID select switch
located inside the receiving frame using a special alignment tool supplied with the
DE100i-A. This procedure is explained later during the installation process.
• The Activity Indicator is a small dot next to the Unit ID Number which illuminates
to show when the host computer is accessing the data on the DE100i-A carrier.
Figure 3: Receiving Frame Front Panel