StorCase Technology DE90i-S - Manual (Page 20)

DE90i-S, Rev. A00 Kingston Technology Company
Appendix A - Attaching the On/Off Key 15
Appendix A - Attaching/Removing the
On/Off Key
The DE90 comes from the factory with a power/lock key which can be attached to the
locking mechanism. Follow the steps below to attach the key.
1. Make certain power is off to the receiving frame.
Locate the rectangular shaped key/lock
mechanism access hole on the inside of the
receiving frame. Note that the pawl is in an
upright position.
Insert the key into the lock. (Skip this step if the
key is already fixed to the lock.)
2. Rotate the key 90 degrees counter-clockwise so
that the pawl is visable in the access hole as
shown in the figure at left.
3. Using the provided adjustment tool, unscrew and
remove the pawl from the access hole.
4. Rotate the key 180 degrees clockwise (or
counter clockwise).
5. Reinstall the pawl into the access hole with the
adjustment tool.
The key/lock has now been reconfigured.
Figure A-1: Reconfiguring the Key/Lock Mechanism
A
B
C
0418
Pawl
Access
Hole
Key/Lock
90
Degrees
180
Degrees