StorCase Technology DX115 - Manual (Page 10)

Introduction 3
DE110 for Backup User's Guide - Rev. A04 StorCase Technology, Inc.
This User's Guide describes the steps required to install the DE110 removable enclosure inside
a computer peripheral bay or external expansion chassis. This guide supplements documen-
tation provided with the host computer system, operating system, and the drive to be installed
within the carrier.
General Description
NOTES: USB 2.0 DE110 carriers and PATA DE110 carriers are interchangeable and will
work in either PATA, USB 2.0, or SATA DE110 “universal" receiving frames.
For USB 2.0 operation, a USB 2.0 controller and USB 2.0 cable (provided) are
required.
Windows® 2000/XP both support USB 2.0. For Windows® 98, a driver down-
load is required (at: http://www.storcase.com/support/firmware.asp).
The StorCase Technology Data Express ® DE110 for Backup is a removable drive carrier and
receiving frame, designed to provide durable and reliable mounting for one (1) low-profile (up
to 1" high) 3.5" Ultra ATA100 drive within a 5.25" half-height peripheral slot (Figure 2). It is
downward compatible with earlier technology IDE drives.
The USB 2.0 DE110 allows a drive to be removed and transported to another USB 2.0 or PATA
DE110-equipped computer or expansion chassis, and also provides the ability to secure
sensitive data by removing and storing the drive safely for future use.
The DE110 for Backup includes a EMC ® Retrospect ® (Express or Disk-to-Disk) Backup soft-
ware CD, which allows for easy data backup and restoration.
Drive
Carrier
0834
Receiving
Frame
Figure 2: DE110 Receiving Frame and Carrier