StorCase Technology DE50 - Manual (Page 22)

PATA DE50 User's Guide - Rev. E00 StorCase Technology, Inc.
Installation 15
NOTE: The lock on the DE50 receiving frame functions as a lock and a DC power switch
for the carrier unit. The lock must be engaged in order to supply power to the
carrier and installed drive.
5. Reboot the computer. The new disk is now ready for use, although it may have to
be formatted or initialized prior to use with your operating system and applications
software.
Unit ID Select Switch Settings
NOTE: The unit ID number display is for ID display purposes only (when using the Drive
Select Method). The master/slave setting must still be set on the DE50 unit itself
(refer to page 9 of this User's Guide for further information).
The following table lists the Unit ID Select Switch settings and the valid AT/IDE unit numbers.
Please note that all invalid switch settings have X's through them and result in a blank display
in the receiving frame display window.
Unit ID Select
Position
Unit ID Number
Display
Drive
Selection
0 5 4 3 2 1 8 7 6 9
0
Master Slave Master Slave
Blank 1 Blank Blank 2 3 Blank Blank Blank
824b
Table 1: Unit ID Select Switch Settings