Starrett SR200 Surface Roughness Tester - Manual (Page 19)

SR200 Specifications subject to change 4.4
EVALUATION LENGTH
RANGE
UNITS
FILTER
DUMP MODE
All other settings are carried out via the PC.
SPC Mode
If SPC is required, this can be switched on by pressing the PRINT  and SCROLL  key
down simultaneously. The following warning screen will appear:
Warning
Changes to the following settings
are for advanced functions only
Quit OK
Selecting OK displays the Select language and select SPC mode screen. Select the SPC Mode
then SCROLL  will toggle the mode between ON and OFF. When SELECT  is pressed with
OK selected the previous screen will be shown again.
S PC ModeON
OK
Language Settings
The default on the SR200 is English Language. If the user wishes to select other languages,
press the PRINT  and SCROLL  key down simultaneously. The following warning screen
will appear:
Warning
Changes to the following settings
are for advanced functions only
Quit OK