SkyRC T6200 Charger - Manual (Page 9)

T6200 T6200 15 14
BAL CHARGE
CAPACITY: 40mAh
TIME 00 02 00 : : :
CURRENT 2 0A : .
VOL 25.06V :
E.TEMP 0 C :
I. TEMP 36 C :
BALANCE
STATUS
GRAPH STOP
BAL CHARGE
CAPACITY: 40mAh
TIME 00 14 06 : : :
CURRENT 2 0A : .
VOL 25.0V :
E.TEMP 0 C :
I. TEMP 45 C :
BALANCE
STATUS
GRAPH STOP
BALANCE
ENTER
CELL1
CELL2:
CELL3:
CELL4:
CELL5:
CELL6: : 4 18V
4.17V
4.18V
4.18V
4.17V
4.18V .
BATT RES
CAPACITY: . 85MΩ
1300mAh
When the charger is working, the users could check the real time status of charging capacity,
cell voltage, charging time, external and internal temperature easily. What's more, it can also
display the voltage in a graphic which helps the user monitor the charging status all the time.
Please touch “GRAPH” to check charging/discharging curve.
Note: When charging Lithium batteries in balance mode, you could check the balance
status and internal resistance of battery pack.
VOLTAGE CURVE
ENTER
TIME
VOLTAGE: . 00:14:06
25.0V
T
V
USING THE CHARGE CONTROL SOFTWARE
“CHARGE MASTER”
The free “Charge Master” software gives you unparalleled ability to operate the charger
through the computer. You can monitor pack voltage, cell voltage and other data during the
charging process, view charging data in real-time graphs. And you can initiate, control charging
and update firmware from “Charge Master”.
In order to connect the charger to the computer and use the “Charge Master”, you are required
to use a USB cable which is not included in this package. The cable must be terminated on
one end with “A” plug and the opposite end is terminated with “mini-B” plug which can connect
to the charger directly.
The “Charge Master” can be download from www.skyrc.com. For more details, please refer to
HELP file which can be found in “Charge Master” software.
CHARGING STATUS MONITOR
LiPo 6S C6.0A / D2.0A P1 LiPo 6S C6.0A / D2.0A P1
LiPo 6S C6.0A / D2.0A P1 LiPo 6S C6.0A / D2.0A P1
Inner resistance of battery pack inclusively all connectors and leads.
CHARGING STATUS MONITOR
The user can check lithium battery's total voltage, the highest voltage, the lowest voltage and
each cell's voltage; and can check Nickel and Pb battery's total voltage.
Touch start button or touch and hold “Volt Meter” for 3 seconds to enter voltage meter program.
CELLS CAPACITY
BATT TYPE
Pb
Lilon
OPERATION
VOLT METER
CHARGE
START SETTING
LiPo 6S C6.0A / D2.0A
PRESET
LiPo
mAh
P1
BAL CHARGE
BATTERY VOLT METER
ENTER
CELL1
CELL2:
CELL3:
CELL4:
CELL5:
CELL6: : 4 18V
4.17V
4.18V
4.18V
4.17V
4.18V .
MAX MIN
VOL: D-V:
: : 4 18V 4.17V
25.06V 0.01V
.
BATTERY VOLT METER
Concerning to Lithium battery, please connect the battery to the charger main battery lead to
battery socket and balance wires to balance socket.
Concerning to Nickel and Pb battery, you could connect it directly to the charger to check the
total voltage.
This diagram shows
the correct way to
connect your battery
to check the voltage.
This diagram shows
the correct way to
connect your battery
to check the voltage.
DC
INPUT
1 1-18V
Lithium
Battery
VOLT METER
ENTER
CELL1
CELL2:
CELL3:
CELL4:
CELL5:
CELL6: : 4 18V
4.17V
4.18V
4.18V
4.17V
4.18V .
MAX MIN VOL: D-V: : : 4 18V 4.17V 25.06V 0.01V .
LiPo 6S C6.0A / D2.0A P1
DC
INPUT
1 1-18V
VOLT METER
ENTER
VOLTAGE: 9.60V
LiMH 6S C6.0A / D2.0A P4
Power Supply
Power Supply
NiMH/NiCd
Battery
NiMH/NiCd
Battery
VOLT METER