SkyRC T6200 Charger - Manual (Page 3)

Terminal Voltage Control (TVC)
The charger allows user to set the charge/discharge end voltage.
Battery Volt Meter
The user can check Lithium battery's total voltage, the highest voltage, the lowest voltage and each
cell's voltage; and can check Nickel and Pb battery's total voltage.
Balance Socket-XH
DC Input
11-18V AC
USB Port for PC
Control & Firmware
Upgrade
Battery Socket
Temperature
Probe Socket
Multiple Balancing Board
Air Intake
Duct
Tilt Stand
Cooling
Fan
Servo/ESC Port
Brushless Motor
Sensor Port
USB 5V/1A
MAIN FEATURES
Touch System
Equipped with a 3.2” touch sensitive color LCD screen, it is intuitive as all the operating and
changing status can be displayed in this screen. What's more, the touch screen can register the
users' input precisely so that the users can have a wonderful and comfortable “touch” experience.
Optimized Operating Software
SKYRC T6200 Charger features the so-called AUTO function that set the feeding current during the
process of charging or discharging. Especially for lithium batteries, it can prevent the overcharging
which may lead to an explosion due to the user's fault. It can disconnect the circuit automatically and
alarm once detecting any malfunction. All the programs of this product were controlled through two
way linkage and communication, to achieve the maximum safety and minimize the trouble. All the
settings can be configured by users!
Charging Status Monitor
When the charger is working, the users could check the information of charging capacity, cell
voltage, charging time, external and internal temperature easily. What's more, it can also display the
voltage in a graphic which helps the user monitor the charging status all the time.
Internal Independent Lithium Battery Balancer
SKYRC T6200 Charger employs an individual-cell-voltage balancer. It isn't necessary to connect an
external balancer for balance charging.
Balancing Individual Cells Battery Discharging
During the process of discharging, SKYRC T6200 Charger can monitor and balance each cell of the
battery individually. Error message will be indicated and the process will be ended automatically if
the voltage of any single one cell is abnormal.
Adaptable to Various Type of Lithium Battery
SKYRC T6200 Charger is adaptable to various types of lithium batteries, such as LiPo, LiIon and the
new LiFe series of batteries.
Fast and Storage Mode of Lithium Battery
Purposes to charge lithium battery varies, 'fast' charge reduce the duration of charging, whereas
'store' state can control the final voltage of your battery, so as to store for a long time and protect
useful time of the battery.
Cyclic Charging/Discharging
1 to 5 cyclic and continuous process of charge>discharge or discharge > charge is operable for
battery refreshing and balancing to stimulate the battery's activity.
Memory Preset
The charger can store up to 5 different charge/discharge profiles for your convenience. You can keep
the data pertaining to program setting of the battery of continuous charging or discharging. Users
can call out these data at any time without any special program setting.
INTRODUCTION
T6200 T6200 03 02
FEATURES
Color LCD
Touch Screen
3.2"(320x240 dot)