SkyRC RS16 180W/16A Balance Charger/Discharger - Manual (Page 4)

Cyclic Charging/Discharging
1 to 5 cyclic and continuous process of charge>discharge or discharge >
charge is operable for battery refreshing and balancing to stimulate the
battery's activity.
Memory Preset
The charger can store up to 5 different charge/discharge profiles for your
convenience. You can keep the data pertaining to program setting of the
battery of continuous charging or discharging. Users can call out these data
at any time without any special program setting.
Terminal Voltage Control (TVC)
The charger allows user to set the charge/discharge end voltage.
Re-Peak Mode of NiMH/NiCad Battery
In re-peak charge mode, the charger can peak charge the battery once,
twice or three times in a row automatically. This is good for making certain
the battery is fully charged, and for checking how well the battery receives
fast charges.
Delta-peak Sensitivity for NiMH/NiCad
Delta-peak sensitivity for NiMH/NiCad battery: The automatic charge
termination program based on the principle of the delta-peak voltage
detection. When the battery's voltage exceeds the threshold, the process
will be terminated automatically.
Automatic Charging Current Limit
You can set up the upper limit of the charging current when charging your
NiMH or NiCad battery, it is useful for the NiMH battery of low impedance
and capacity in the 'AUTO' charging mode.
Capacity Limit
The charging capacity is always calculated as the charging current
multiplied by time. If the charging capacity exceeds the limit, the process
will be terminated automatically when you set the maximum value.
Temperature Threshold*
The battery's internal chemical reaction will cause the temperature of the
battery to rise. If the temperature limit is reached, the process will be
terminated.
Processing Time Limit
You can also limit the maximum process time to avoid any possible defect
PC Control Software “Charge Master”
There is a micro USB port in the charger which can be used to connect it to
the PC. You need optional USB cable (USB A Male to Micro B Male) which
is not included in the package. The free “Charge Master” software gives you
unparalleled ability to operate the charger through your computer. You can
monitor pack voltage, cell voltage and other data during the charging, view
charge date in realtime graphs. And you can initiate, control charging and
update firmware from “Charge Master”.
When your charger is connected to computer, the “Charger Master” takes
over the control of charger. You can control and operate the charger via the
“Charger Master” only.
Fast and Storage Mode of Lithium Battery
Purposes to charge lithium battery varies, 'fast' charge reduce the duration
of charging, whereas 'store' state can control the final voltage of your
battery, so as to store for a long time and protect useful time of the battery.
LiPo Battery Meter
The user can check battery's total voltage, the highest voltage, the lowest
voltage and each cell's voltage.
SPECIAL FEATURES SPECIAL FEATURES