Simaudio Neo 350P Preamplifier - Manual (Page 7)

350P Preamplifier
____________________________________________________________________________________
7
Unpacking
The Nēo 350P Preamplifier should be removed from its box with care.
The following accessories should be included inside the box with your preamplifier:
9 AC power cable
9 ‘CRM-2’ remote control with two ‘AA’ batteries
9 This owner’s manual
9 Warranty and product registration information (USA and Canada only)
Once the Nēo 350P is unpacked, inspect it
thoroughly and report any damage to your dealer
immediately. We suggest that you keep all of the
original packaging, storing it in a safe, dry place in
case you’re required to transport this product. The
customized packaging is specially designed to
protect the 350P from any potential damage during
transit.
Please write the serial number of your new Simaudio Nēo 350P in the space provided below for future eference.
Serial No.: ________________
Installation & Placement
The Nēo 350P requires only minimal ventilation to
maintain an optimum and consistent operating
temperature. However, you should avoid placing it
near a heat source as this could compromise the
preamplifier’s performance and reliability. As well, it
should be placed on a solid level surface. The 350P
uses toroidal transformers; even though they are
well shielded, you should not place the preamplifier
too close to source components sensitive to EMI,
such as a turntables.
If you intend to use the Nēo 350P’s USB input
connection with a Windows-based computer,
you will need to install our USB HD driver,
which can be downloaded from the support
section of our website.
Note: Apple-based computers don’t require
this driver.