Simaudio Neo 350P Preamplifier - Manual (Page 16)

350P Preamplifier
____________________________________________________________________________________
16
Remote operation with multiple MOON components
Figure 6: Remote Operation with SimLink™ and 12V Trigger
In figure 6 we have a 180 MiND Music Streamer
connected to a Nēo 350P Preamplifier via their
respective SimLink™ ports (using a 1/8” mini-jack
cable), and the 350P connected to a 330A
Amplifier via their respective 12V triggers (also using
a 1/8” mini-jack cable). When you launch the MiND
App on your Apple smart device (full list on the
MiND page of our website) and select this system’s
ZONE, the 180 MiND will turn on, as will both 350P
and the 330A; The 350P will automatically switch
to the “MiND” assigned input, as described
previously in the SimLink™ section. To shut down
the system, press “Off” for this ZONE in the MiND
app.
Figure 7: Remote Operation with 12V Trigger
In figure 7 we have a Nēo 350P Preamplifier and
330A Amplifier connected together via their
respective 12V triggers; The 12V trigger output on
the 350P is connected to the 12V trigger input on
the 330A (using a 1/8” mini-jack cable). When you
turn on the 350P via remote control (or its Standby
button), the 330A will turn on automatically. The
same rule applies when you put the 350P into
Standby mode.