Rocktron Patchmate Loop 8 Floor - Manual (Page 6)

6
6 CHANGES Function
In this function switch 8 is used to select if you would like the PatchMate LOOP 8 Floor to
respond to MIDI Program changes and MIDI Controller changes or not. See the section in this
manual called "CHANGES Function" for more details.
7 ACTIVE - Power LED
When this LED is lit the PatchMate LOOP 8 Floor is "ON" or "ACTIVE". To turn on the
PatchMate LOOP 8 Floor, use the POWER switch located on the back panel. See PatchMate
LOOP 8 Floor Back Panel section of this manual for more information on the power switch.
8 STORE Button & PRESET LED
This Switch is used to STORE (save) any preset that has been changed and to put the PatchMate
LOOP 8 Floor into "PRESET" mode.
See "STORING PRESETS" and "PRESET MODE" sections in this manual for more details on
these functions.
PatchMate LOOP 8 Floor Top Panel Continued......