RAVE Sports Activity Island w/ EZ Up II Board Platform - Manual (Page 8)

8
INFLATION
We highly recommend using the RAVE High
Speed Inflator/Deflator. It will provide rapid
inflation/deflation and will achieve optimum
air pressure in your RAVE product. (Part
#01083 not included).
To lock open valve, depress the stem
and rotate ¼ turn clockwise. To
close valve, depress the stem and
rotate ¼ turn counter-clockwise. The
valve stem should be in the
depressed position while inflating.
Replace cap on valve after inflation
to ensure air tight seal.
If you are using the RAVE Sports High Speed
Inflator (Part #01083), simply lock the adaptor
onto the end of the inflation hose and insert into
the valve body. Turn ¼ turn to lock in place.
NOTE: This inflation adaptor will automatically open
the valve when inserted and will close the valve when
removed. You do not need to manually open/close the
valve when using this special adaptor.
IMPORTANT: A PROPERLY INFLATED TUBE WILL FEEL
LIKE A FIRMLY INFLATED BASKETBALL.
To Deflate:
Rapid deflation can be achieved using the “deflate” side of
the motor housing. Attach the hose to the deflate side of
the motor housing and lock the valve adaptor into the valve.
Turn on deflator and let run until all air is evacuated from
the tube.
OPEN
CLOSE