RAVE Sports Activity Island w/ EZ Up II Board Platform User Manual
Page 26

26
How to Connect the Rope Swing to the
Access Ramp and Activity Island
NOTE: The grey platform is not used when
connecting the Rope Swing to Activity Island.
NOTE: There are three straps connected to the
Rope Swing center tube section. These straps are also not used
when connecting the Rope Swing to the Activity Island. Roll up
the straps and secure with a rubber band or similar device so
they are not in the way when attaching to the Activity Island.
Step 1
Float the assembled Rope Swing out to the Activity Island with
the Access Ramp already mounted.
Step 2
There are two buckle straps at the top of
the Access Ramp. Run these over the top
of the Rope Swing tube.
Feed the two long lower middle straps
around the bottom side of the Rope
Swing tube and through the buckles on
the upper straps. Pull tightly to secure
the Access Ramp tightly to the Rope Swing tube.
Top Straps with Buckles
Bottom Inside Straps
Bottom Outside Straps