RAVE Sports Activity Island w/ EZ Up II Board Platform - Manual (Page 19)

19
Now that the Launch Pad is connected onto the Activity
Island, it is time to connect the Aqua Launch.
How to Connect the Aqua Launch
to Launch Pad and Activity Island
Step 1
Lay the Aqua Launch on a flat surface. Make
sure there are no sharp objects under the
product that might puncture the tube.
Step 2
See inflation and valve operation on page 8.
Inflate the Launch until the tip of the
inflation gauge strap is just touching the
ground. DO NOT FILL THE LAUNCH TO FULL
CAPACITY. A softer Launch will perform
better than a firmer one. You might want to experiment
with air pressure for best launching results.
Use the inflation gauge strap as a reference
as to how much air is in the Launch. More
air will raise the tip of the strap relative to
the surface of the water.
Step 3
Locate the apron and straps on the end of
the Launch. Make sure the graphics are
facing upward.
Tip of strap should
be touching surface
of water.