RAVE Sports Activity Island w/ EZ Up II Board Platform User Manual
Page 29

29
Repairs
For large holes, tears or seam failures, contact RAVE Sports
at 1-800-659-0790.
Additional repair patches can be found online at
www.ravesports.com.
For minor holes and tears:
• Inflate the product and locate the leak by spraying the
tube with mild soapy water.
• Determine the hole size and cut a patch 1-2 inches
wider than the diameter of the hole. Make sure all
corners of the patch are rounded.
• Deflate the product and clean the patch and area
around the hole with rubbing alcohol. Let dry
completely.
• READ AND UNDERSTAND THE WARNINGS ON THE
GLUE CONTAINER.
• Apply glue to the patch and the area around the hole.
Let the glue dry until it is tacky to the touch. (about 30
seconds)
• Lay the product on a flat, hard surface and apply the
patch. Working from the center to the outer edge, rub
out any air bubbles between the patch and the
product.
• Let patch dry for 24 hours before attempting to inflate
the product