RAVE Sports Activity Island w/ EZ Up II Board Platform - Manual (Page 14)

14
How to Connect the Aqua
Beam to Activity Island
Step 1
Before inflating the Aqua Beam, lay the inflatable on a flat
surface. Make sure there is no sharp object under the
product that might puncture the material.
Step 2
Locate the valve and start inflating. See inflation and valve
operations on page 8. Inflate tube until it is firm like a
basketball.
Step 3
There are two straps that connect the Aqua Beam to the
Activity Island. Two extra straps are provided should you
want to connect the Aqua Beam between two Activity Islands.
Float the Aqua Beam up to one side of the Activity Island.
Orient the Aqua Beam so the anchoring ring is farthest away
from the Island.
Feed the end of one strap through the ring on the bottom
side of the Beam and through the corresponding ring on the
bottom side of the Island.
Step 4
Feed strap through the middle opening of the buckle and
then feed it through the bottom opening.