Pitney Bowes DI380 OfficeRight Systems - Manual (Page 50)

3 • OMR
3-10 SV61789 Rev. A
Programming an OMR Job
Entering the Setup Mode
Open the hinged cover to the
right of the display. This exposes
the setup buttons.
Press
Setup. The indicator lights
and the machine asks for an ac-
cess code. This code prevents
the machine’s settings being
changed by unauthorized per-
sonnel.
Use the
Change (+/-) buttons to
select the access code 71.
Press Next (►) to advance to the
next setting…
Choosing the New Job
Number
The machine asks for the job
number you wish the new set-
tings to be stored under. Use the
Change (+/-) buttons to display
the job number you want.
Notes:
• If you use an existing job
number, the system will over-
write the old settings will the
new settings you are about to
make.
• If you want to find a currently unused job number, press Change
( +/-) until you see a job where the display shows no symbols
alongside the feeders or in the fold setup area. This means the
job number is currently unused.
Press Next (►) to advance to the next setting…