Pitney Bowes DI380 OfficeRight Systems - Manual (Page 37)

Operation • 2
2-21 SV61789 Rev. A
Envelope Stop
Select the position of the ma-
chine’s envelope stop.
The stop has five positions num-
bered 1 to 5. Setting 3 is the stan-
dard setting for normal weight
paper with standard folds. A thin-
ner/lighter insert will require a
lower setting and thicker/heavier insert a higher setting.
Press
Change (+/-) until the setting you want is displayed.
When the envelope stop is set as required, press Next (►) to ad-
vance to the next set
Batch Counter
The batch counter allows you to automatically process pre-defined
batches of finished mailpieces. When the batch is complete, the ma-
chine stops automatically. Press Start to begin processing the next
batch.
If batch counter is
not selected, the display counter simply counts
the number of items processed until you press Reset Counter.
Press Change (+/-) to switch batch mode On or Off.
When the setting is correct, press
Next (►).
If batch counter is turned on,
the machine will now ask for the
batch quantity. The default quan-
tity is 50, but you may select any
value up to 999 using the Change
( +/-) buttons.
When the setting is correct, press Next (►).