Pitney Bowes DI380 OfficeRight Systems - Manual (Page 20)

2 • Operation
2-4 SV61789 Rev. A
Setting the Sheet Feeders
1. Adjust the side guides to the
wdth of the material, then
back-off a quarter turn on
the side guide control. This
sets the correct clearance
between the guides and the
material.
2. Take the stack of paper and
aerate (fan) it to ensure that
individual sheets are not
stuck together.
3. Jog the stack back into align-
ment. The sheet feeders take
the paper stack aligned in a
manner similar to that used
for a photocopier paper cas-
sette.
4. The display indicates the correct orientation of the paper.
FACE UP
HEAD FIRST
ABC
FACE DOWN
FEET FIRST
ABC