Pitney Bowes DI380 OfficeRight Systems - Manual (Page 25)

Operation • 2
2-9 SV61789 Rev. A
5. Take the stack of inserts and
fan it to ensure that individual
pieces are not stuck together.
6. Shingle the inserts so that
they look like the photograph
on the right and place them
onto the feed deck.
Loading orientation can vary
depending on the actual in-
serts you’re running. However, as a general guideline, load in-
serts as follows:
Slip Face up, bottom edge first
Reply Envelope Face up, top edge first
Pre-Folded Face up, closed edge first
Booklet Face up, bound edge first
7. Let the wedge (material prop)
slide down behind the stack
to support the inserts.