Pitney Bowes B700 - Manual (Page 8)

7 SV60943 Rev. B
5. Refilling Your Meter
Obtaining the Current Meter Access Code
To obtain your meter’s current access code:
a. Press the Refill button. Your default reset amount will display.
b. Press the Enter button if you wish to refill for the amount shown, OR enter a new
amount, and then press the Enter button to confirm.
c. Insert a spare envelope or index card as a form (this will run through the ma-
chine) OR press the Enter button again.
Depending on the action you took in step c, your current access code will either dis-
play or will print on the envelope or index card you ran through the machine.
NOTE: Your access code changes as you use postage, so be sure to obtain the current ac-
cess code each time you refi ll your meter.
Obtaining the Refill Combination
NOTE: You can refi ll your meter either on the internet or on the phone.
Refilling Your Meter on the Internet
In order to refill your meter on the internet, you will need your User ID, password,
meter serial number, and current access code from Step 1: Obtaining the Current
Meter Access Code, above.
a. Go to www.postagebyphone.com.
b. Enter your User ID and password. Click Login.
c. On the "Transactions" page:
i. Click on Refill Your Meter.
ii. Enter your 7-digit meter serial number. If prompted, click Continue.
d. On the "Refill Meter" page:
i. Enter the current meter access code.
ii. Enter the Refill Amount you wish to add to your meter.
iii. Click Continue.
e. On the "Verify Your Choices" page:
• Click Refill Meter if all information is correct, OR
• Click Re-enter Amount to change the dollar amount.
Your Setting Combination displays on the "Meter Refill Confirmed" page. You can
now go to your meter and follow the steps in Entering Your Refill Amount into the Me-
ter on page 8.
B700/B702 Quick Install Guide
SV60943B Book.indb 7 SV60943B Book.indb 7 5/20/2004 2:31:19 PM 5/20/2004 2:31:19 PM