Pitney Bowes B700 - Manual (Page 5)

4 SV60943 Rev. B
2. Connect the Power Cord
Remove the meter from the shipping
carton and place it on your work surface,
close to a properly grounded 120 VAC
wall outlet. Choose a convenient loca-
tion—one where you have enough room
to establish an efficient work flow.
a. Connect the power cord to the re-
ceptacle at the back of the meter as
shown.
b. Connect the power cord to a properly
grounded 120 VAC wall outlet.
WARNING! Always plug the meter into a properly grounded wall outlet. This
reduces the risk of shock and equipment damage in the event of a short circuit.
DO NOT remove the power cord’s ground pin and DO NOT use a ground adapter.
Read the safety notes printed on the inside front cover of this booklet.
3. Install the Ribbon
a. Unpack the ribbon cassette and re-
move the shipping tab. If necessary,
turn the winder counterclockwise to
remove any slack from the ribbon.
UL
b. Open the cassette door.
a
b
B700/B702 Quick Install Guide
SV60943B Book.indb 4 SV60943B Book.indb 4 5/20/2004 2:31:18 PM 5/20/2004 2:31:18 PM