Pitney Bowes DM225 - Manual (Page 16)

14
Moistener
Moistener
Release Lever
The optional moistener allows you
to moisten, seal, and apply postage
to your envelopes all in one smooth
step.
Position the moistener on the left
side of the deck as shown. Hold
down the blue release lever and
slide moistener from left to right,
with the lip of the moistener above
the deck.
Scale (continued)
Position the assembled scale as shown. Now plug the connector on the
bottom of the base unit into the matching connector on your system.
DM200L / DM225
DM100i / DM125
A scale code is needed to calibrate the scale. If you have just attached
your scale, key in the correct scale code for your location. Codes for
each state can be found in the back of this guide on Page 19-20.
Select
Continue .