ParkZone PKZ5980 - Manual (Page 12)

EN
Elevator
Bind your aircraft and transmitter before doing these tests. Move the controls on the transmitter to make sure the aircraft control surfaces move correctly and in
the proper direction. After performing the Control Test, correctly set the failsafe. Make sure the transmitter controls are at neutral and the throttle and throttle trim
are in the low position, then rebind the model to your transmitter. If the receiver loses its link to the transmitter, the failsafe makes the controls and throttle go to
these settings made at binding.
Aileron
Rudder
Up Elevator
Command
Stick
Left
Stick
Right
Stick
Left
Stick
Right
Down
Elevator
Command
Control Direction Test
12