Draytek 2130 User Manual
Page 68
Vigor2130 Series User’s Guide
60
TCP/UDP Port Click
Single or Range. If you select Range, you have to type
in the starting port number and the end porting number on
the boxes below.
TCP/UDP Port Range
Type in the starting port number and the end porting number
here if you choose Range as the type.
z
If you choose DSCP as QCE Type, you have to type value for it and specify traffic class
from Low, Normal, Medium and High.
z
If you choose ToS as QCE Type, you have to specify priority class from Low, Normal,
Medium and High.
z
If you choose Tag Priority as QCE Type, you have to specify priority class from Low,
Normal, Medium and High.